Profildragen GRP-plastdurk 30x10x30
Höjd 30 mm, avstånd 30 mm
| Span width (mm) |
Concentrated load (kg) |
Safety factor |
Distributed load (kg/m2) |
Safety factor |
|---|---|---|---|---|
| 300 | 1.035 | 2 x F | 17.180 | 3 x q |
| 450 | 523 | 3 x F | 5.758 | 4 x q |
| 600 | 319 | 4 x F | 2.628 | 5 x q |
| 750 | 209 | 5 x F | 1.396 | 7 x q |
| 900 | 146 | 6 x F | 815 | 8 x q |
| 1.000 | 120 | 7 x F | 601 | 9 x q |
| 1.200 | 84 | 8 x F | 350 | 10 x q |
| The loads were determined at a bending of L/200. The bending L/200 corresponds to 0.5% bending of the span width (Bending f=L/200; L= span width). The application-specific suitability is to be tested individually. | ||||
| Weight (kg/m2) | Open area |
|---|---|
| 11,5 | ca. 56% |
This post is also available in: Norskt Bokmål Engelska